Paralelni dojavnik UniPos IFS 7002 R
The IFS7002R repeater panel allow vital information from the IFS7000 system to be transmitted through points around the building, remote from the fire alarm control panels. Distributed at strategic points in a facility – such as nurse stations, floor landings, control rooms – valuable time can be saved when identifying the location of a fire and/or evacuating the building.
| Brend | UniPos |
|---|
Tehničke karakteristike:
– 1 adresabilna petlja
– 2 nadgledana izlaza
– 1 relejni izlaz za vatrodojavu
– 1 programabilni relejni izlaz za vatrodojavu
– 1 relejni izlaza za dojavu greški sustava
Broj zona :
– Maksimalni broj zona – 64
Vatrodojavna petlja:
– Malsimalni broj detektora u 1 petlji – 125
– Spojna linija – 2-žični oklopljeni vatrodojavni kabel
– Maksimalni otpor petlje – 100
– Izlazni otpor petlje – 20
– Maksimana potrošnja petlje – 200mA
Nadgledanih izlaza – 2
– Tip – potential
– (24±5)V/0,5A
Relay output for fire conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC
Relay (programmable) output for fire conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC
Relay output for fault conditions – 1 pc
– Type – potential free, switching
– Electrical characteristics – 3A/125VAC; 3A/30VDC
Performance:
– Control over fire alarm loops and monitored outputs for fault conditions (short circuit and interruption) and automatic reset
– Dedicated led indication per fire zone
– Detection of removed devices in the loops and automatic reset
– Ability to set the zones in Coincidence Mode
– Two phases of Fire condition, programmable time for Fire condition stage I, separately for each zone
– Option to prolong the time period for Fire condition stage I with programmable inspection period, specified for each zone
– Built-in sounder for fire condition – one tonal, discontinuous, can be switched off
– Built-in sounder for fault condition – one tonal, discontinuous, can be switched off
– Built-in real time clock
– Set of test modes and options for adjustment
– Setting the clock:
– Check ups on light and sound indications
– Test of fire alarm zones
– Adjustment of outputs and integrated external devices
– Programming of parameters and modes of operation
– Remote programming of the parameters from distant operator control point
– Energy independent event log of registered events with the events type, date and hour – up to 1023 events
– Interfaces for communication with external devices – CAN 2.0B and USB.
Indications of registered events:
– Light indication – LED
– Text messages – LCD display, 320 х 240 points, backlit
– Sound signaling – built-in sounder
Power supply:
Mains:
– voltage – 220/230V
– frequency – 50Hz
Back up batteries:
– battery type – lead, gel electrolyte
– number of batteries – 2 pcs
– connection – serial connection
– nominal voltage of the back up battery – 2x12V DC
– nominal capacity C20 – 7Ah
– charge voltage – 28V
Consumption on back up batteries supply:
– at 24V – <160mA
– at 26V – < 150mA
Power supply to external devices:
– Voltage – (24±5)V
– Maximum current value (including current of monitored outputs) – 1А
Dimenzije
– Ukupna dimenzija – 286 x 148 x 125 mm
– Težina (bez baterija) – 1.240 kg.
