Opis
The TMS-204 transmodulator is a device enabling distribution and management of satellite TV content in a private TV system. The TMS-204 module is used to convert a DVB-S/S2 signal into a DVB-T/DVB-C signal. The device is capable of receiving “multistream” signals and enables reception of free-to-air channels. One panel TMS-204 receives the entire signal package from four satellite transponders and creates two adjacent DVB-T (max. capacity 31.68 Mbps) or DVB-C (max. capacity 53 Mbps) multiplexes. In practice, this means several channels in standard SD/HD resolution for each multiplex. The system administrator selects the channels of interest from a given satellite stream and then creates two adjacent DVB-T/C multiplexes. When remultiplexing the streams, a safety margin of 10% should be kept in mind when determining the maximum bit rate for the entire multiplex. If the limit is exceeded, it is possible to feed the signal to further TMS-204 modules. The digital DVB-T/C signal available at the output is supplied to the end receivers, usually with the use of splitters/tappliers. Such a solution works best in modern hotel systems, distributing high-quality programmes, including high-definition HD channels.
- conversion of DVB-S/S2 signal (multistream compatible) to DVB-T/DVB-C signal
- conversion of DVB-S/S2 signal from four satellite transponders to 2 DVB-T/C multiplexes
- reception of uncoded FTA channels
- channel selection and filtering of unnecessary services in the digital stream
- simple control interface via RJ-45 port, which greatly simplifies the installation procedure
- web-based control
- reading the history of events (logs) from the panel
- AGC function (automatic control of signal amplification)
Product type | Transmodulator | ||
Name | TMS-204 | ||
Brand | ALCAD | ||
Conversion | DVB-S/S2X Multistream —>DVB-T/C | ||
RF input | Number of supported transponders | 4 | |
Number of F-connectors | 2 | ||
Channels | FTA (uncoded) | YES | |
Specifications | |||
RF input | Frequency range | MHz | 950…2150 |
Power supply/control | DiSEqC 2.0 DC 13/18 V 350 mA | ||
Standard | DVB-S/S2X Multistream | ||
Impedance | Ohm | 75 | |
RF output | Standard | DVB-T/C | |
Number of DVB-T MUXes | 2 | ||
Number of DVB-C MUXes | 2 | ||
Modulation | DVB-T: QPSK, 16QAM, 64QAM, DVB-C: 16QAM, 32QAM, 64QAM,128QAM, 256QAM | ||
Frequency range | MHz | 47…862 | |
Signal strength | dBμV | 80 | |
Signal pos. adjustment | dB | 0…20 | |
Impedance | Ohm | 75 | |
MER | dB | 39 | |
Channel bands | MHz | 6, 7, 8 | |
FFT mode | 2K/8K | ||
Symbol rate | Ms/s | 1…8 | |
RF output | Bandwidth | Mbps | 2×31 (DVB-T) or 2×53 (DVB-C) |
General | |||
Configuration | Port | RJ-45 (web browser) | |
IP address | 192.168.10.1, User: alcad, Password: alcad | ||
Remote | YES | ||
Current drawn | V/A | DC 12/1.1 | |
Operating temperature | °C | -10…+50 | |
Dimensions | mm | 256x138x29 |